3D Printing

Hier kann ein kurzer aussagekräftiger Text stehen, der dem Besucher einen groben Überblick gibt, in welche Richtung des 3D-Druckens deine Patente gehen und in welchen Bereichen sie eine Innovation darstellen.

FDM: 6-Filament Printhead

A 6-filament print head for full color printing including support material and black and white. An extremely small, compact unit to be offered to all FDM manufacturers. Works with TMC Stepper Controllers that are controlled by SPI and just another Chip Select line so that each printer circuit board can use the unit. Comes by default with an Arduino library that almost any FDM manufacturer can easily integrate. Version 2.0 with filament encoder with 2 full-step resolution. With automatic stall detection and prevention so that cybernetic temperature-compression filament feed controls allow a clean print.

SLA Resin Printer

A fast resin printer with self-developed resin formulation, fully injection molded. Triangulated and quadrangulated planes and load cells for load detection and active separation. Higly reliable, very fast to fabricate, with automatic calibrations. It is extremely reasonably sourced and can be produced for under € 200, very light and therefore inexpensive to transport.

Due to the new development of the adhesion-free separation (oxygen inhibition) or wear of thinnest oil films competing models produce “continuously”, which is why the project pauses until an equal print speed can be offered.

Variable Fdm Nozzle

The invention relates to a method and an apparatus for producing three-dimensional objects by means of a rotatable mold-variable nozzle head (12) for filament printers.

The problem of the long printing times arises from the creation of offset – mostly later invisible – parallel paths for the purpose of stabilizing the shape of the pressure hull.

The object of the invention is to reduce these parallel paths.

The gradual web width increase is achieved by the gradually adjustable nozzle position (9) from 0° to 90°. Web width of 2mm already provides in most cases a sufficient wall thickness, also infill structures are now usually created with a single track so that the device shows a lower recessed nozzle area of 0.4mm x 2mm. In most cases, the entire conventional printhead will not be 5% larger or 5% heavier after retrofitting the swivel nozzle.

MJP-Drum Printer

The invention relates to a method and an apparatus for producing three-dimensional objects by means of a drum in which MEMS printheads are mounted cascadingly over the printing length one behind the other. The drum rotation steers the print head to the desired point to which a liquid is sprayed (eg, resin). Subsequent strips (eg UV LEDs) harden the object. A very fast process in the smallest possible space, with less mechanical effort than common systems need.

The invention also relates to an apparatus for carrying out the method in which the printing drum is cylindrical and is stored vertically and allows the continuous production of several objects with different material properties and colors (Fig. 2c), by running the Tischverfahrebenen run. From my point of view the only method that could replace injection molding.

Large Scale Building Printer

The invention relates to a method and an apparatus for producing three-dimensional objects by means of a rotatable mold-variable nozzle head (12) for filament printers.

The problem of the long printing times arises from the creation of offset – mostly later invisible – parallel paths for the purpose of stabilizing the shape of the pressure hull.

The object of the invention is to reduce these parallel paths.

The gradual web width increase is achieved by the gradually adjustable nozzle position (9) from 0° to 90°. Web width of 2mm already provides in most cases a sufficient wall thickness, also infill structures are now usually created with a single track so that the device shows a lower recessed nozzle area of 0.4mm x 2mm. In most cases, the entire conventional printhead will not be 5% larger or 5% heavier after retrofitting the swivel nozzle.

HSS Drum Printer

The invention relates to a method and an appliance for the layered production of three-dimensional objects by means of powder, in particular, curved layered by a printing drum.

In the method of continuous high-pressure printing by a drum (8) (optionally with layers of different materials from drum integrated internal powder reservoirs), it is provided that the layer pressure takes place like a partial circle around the drum outer wall. During the layer creation the slide (printing bed) (3) continuously moves away layer by layer.

 

The temperature fluctuation control (in the space between the uppermost powder layer and the outer wall of the drum) of + -1% of the sintering temperature (eg of PA12) is now easier to achieve because the print head as well as sintering and rolling unit no longer move in different directions, but only in one, and because the volume of air, usually needed by the SLS / HSS slide, now is based on the distance between the top powder layer and the drum outer wall. Also the process is easier because the whole unit can be built much flatter, and the drum can accommodate several roller, printhead and wave emitter units in a row so that several layers are created simultaneously. This bears the desired side effect that the cooling time is shortened and the sintering period can be extended favouring the quality of the print. The time for creating a layer can be increased, but the overall time of product compilation is considerably shortened by simultaneous layer creation on multiple locations.

 

The extremely reduced cooling time due to the immediately following roller, print head and wave emitter unit has great positive effects on the temperature stability.

Solid Printer

The invention relates to a method and apparatus for producing three-dimensional objects by means of a drum, in which print heads are cascadingly mounted consecutively over the printing length. A continuous rotation of the print head (1) in a drum generates the required centrifugal force (drop speed) to press melted substances (e.g. ABS granules) through a perforated plate of heads, that are located in the drum.

Hyperfusion 2

The invention relates to a method and a device for the layered production of three-dimensional objects, in particular planarly layered via a carousel for the purpose of simultaneous creation of multiple layers with continuous Z-table lowering.

Hyperfusion 3

The invention relates to a method and a device for layered production of three-dimensional objects, in particular planar layered via a printhead carousel for the simultaneous creation of multiple layers with continuous Z-table lowering. The powder bed balls are binder (?)-less locally targeted connected, WITHOUT bed heating and WITHOUT wave emitter (following the printhead).

SLS 3 Drum Printer

The invention relates to three methods and appliances for layered production of three-dimensional objects – in particular, curved layered – via a printing drum, direct laser sintering and continuous Z table subsidence. Or the production of planar layered objects by electrostatic charging and transfer of various (in terms of material properties and color) plastic powders onto a closed, continuous circumferential film as an intermediate carrier with balancing rollers to apply the heat to the print layer in cycles.

The third method combines elements of the aforementioned technologies by allowing continuous printing of a cascade of laser drum pressure roll units built into the rotating drum. All three methods allow previously unattainable printing times, two even offer fast printing of a variety of material properties including full-color printing.

Roboarm Gel Printer

This patent presents a method for producing three-dimensional objects via a rotary throughput and shape variable nozzle, high viscosity dyeable resin and ceiling-mounted robot arm for creating printing that is as vertical as possible relative to the previously created layer, regardless of fixed layer heights and widths.

A boxless design, whose scalability is hardly limited and which can produce almost full-color, life-size objects of previously barely printable size both extremely fast and detailed.

Areas of application: prototype construction, large models, furniture industry, car design, illustrative objects (?Anschauungsobjekt?), etc

Hyperfusion 1

The invention relates to a method and an apparatus for the layered production of three-dimensional objects, in particular curved layered by means of a printing drum and continuous Z-table lowering.
This method allows unprecedented printing times of about 100ms per 1/4m² layer.
With a quarter drum rotation per second and use of a quarter of the drum perimeter for ball layer laying with ten simultaneously active (layering) units of 10cm width plus four special units (evenly distributed on the total perimeter) for colors, metals, etc. layer creation times of a tenth of a second are to be expected.

 

Based on a construction volume of 20L with 1m length (X) x 0.26m width (Y) x 0.8m depth (Z) and a layer thickness of e.g. 50μm via e.g. 60μm diameter layer balls the total building space (consisting of 16000 layers and 100ms/layer) will be built within 1600 seconds or just under 27 minutes.

 

Depending on postprocessing, component complexity (assembly work saved) and component size, for the first time 3D printing can be faster than injection molding. Based on a lay-up time of 7.55 seconds of an HP Jet Fusion 4200 printer for a layer area of about 38cm x 28.4cm ~ 1080cm² ~ 143cm² / sec prints Hyperfusion with 111cm x 26cm = 2886cm² ~ 28860cm² / sec over 200 times faster.